Misting Systems | Valves
& Timers | Filters | Automatic
Systems & Mist Rings
Flexible Fan Mist Rings
3 Nozzle Mist Ring: recommended
for 8" to 14" fans or intakes
4 Nozzle Mist Ring:
recommended for 16" to 22" fans or intakes
5 Nozzle Mist Ring:
recommended for 24" to 30" fans or intakes
View additional misting parts
- Fan shown above is not included -
Get up to 20° F of additional
cooling out of circulation fans and fan
system intakes with these mist rings! This system emits a fine mist (1/2 gph
per nozzle) throughout your greenhouse cooling the air and providing it with added
humidity. Mist rings screw into any standard water hose. Available in 3 different
sizes. Mist ings can be automated with our misting solenoid
valve. Recommended for use with a fine water filter.
- Brass 1/2 gph misting nozzles
- 20' section of UV resistant tubing
- Water hose adapter
- Zip ties to secure mist ring to a fan or intake
- All connectors needed to complete system
Your Own" Misting System
|Choose from the misting
supplies below to build a misting system to meet your individual cooling and/or
humidifying needs whether for greenhouse, outdoor, patio, etc.
using a fine water filter with all misting systems to keep
debris and mineral buildup from clogging nozzles.
Any poly mist nozzles can be combined to receive a quantity
Poly Mist Nozzles
Available in 1, 2, and 3 gph outputs. These precision molded nozzles are made
with a very durable plastic that outwears brass and stainless steel nozzles and
have excellent chemical resistance. Every mist nozzle has a built-in debris filter.
1 gph is best for evaporative cooling. 3 gph is best for misting in seeds and
cutting. 2' spacing between nozzles is recommended. Nozzles fit a 1/8" pipe
thread and are not compatible with our watering system above.
PVC Misting Tee
These Tees allow you to use the 1/8" misting nozzles with 1/2" PVC water
pipe. Teflon tape is needed to seal nozzles into Tees. 1/2"S
x 1/2"S x 1/8"T
Auto Drain Valve
This device automatically drains the water left in the pipe after the misting
system is cut off. Draining the line helps prevents the misting nozzles from dripping
and algae from forming in the pipe. Connector for attaching valve to 1/2"
PVC pipe is included. Teflon tape below is needed to seal
valve into connector.
Teflon Pipe Tape
This special tape is wrapped over the threads of the misting nozzles to provide
a watertight seal when when screwing it into the Tee. Each roll will wrap over
100 nozzles. Highly recommended. 1/2" x 520"
Swivel Hose Connector
This fitting will connect 1/2" PVC pipe to a standard outdoor faucet or water
hose. One end slides over 1/2" PVC pipe and the other has a 3/4" swivel
garden hose connector with washer.
This filter reduces mist
nozzle clogging by preventing trash from entering your water line and minimizing
calcium and mineral buildup. Simply screw on to standard garden hose or faucet.
Recommended for use with all misting systems.
PVC Cool Mist System - 10 nozzle
here for larger image
Click here for PVC
Cool Mist parts
The Cool Mist PVC kit
includes the same quality brass misting nozzles as the System 2000, but has 20'
x 2' of mist coverage. This expandable system emits a fine mist (1/2 gph per nozzle)
throughout your greenhouse providing it with controlled humidity and reducing
temperatures up to 20° F (works like an evaporative cooler for 1/10 of the cost!).
The increased humidity also aids in seedling and cutting germination. Features
1/2" PVC construction. Expandable to 100 feet. Recommended for use with a
fine water filter.
10 - brass misting nozzles
9 - 2' & 1 - 1' sections of 1/2" PVC pipe
10 - mister couplings
12 - hanging clamps
1 - swivel water hose adapter
1 - PVC elbow
1 - 3/4" drain valve
1 - PVC end plug
1 - can of PVC cement
Flexible Mist System - 12 nozzle
View additional misting parts
12 - brass misting nozzles
11 - 2' sections of UV resistant tubing
1 - 18' section of flexible feed line
11 - nozzles tees
1 - nozzle elbow
1 - water hose adapter
24 - mounting clamps
This system emits a fine
mist (1/2 gph per nozzle) throughout your greenhouse providing it with controlled
humidity. Evaporation of the mist can also reduce air temperatures up to 20° F
(works like an evaporative cooler for 1/10 of the cost!). The increased humidity
also aids in seedling and cutting germination. The Flexible Mist System requires
no tools for assembly! Just insert pipe into fittings, and they lock into place.
Screws into any standard water hose. 24' x 2' of mist coverage. Expandable to
100 feet. Recommended for use with a fine water filter.
4 - brass misting nozzles
1 - 10' section of UV resistant flex tubing
4 - nozzles tees
1 - nozzle elbow
6 - mounting clamps
Click here for
Replacement Mist Nozzles
Shape Tubing to Fit Your Application
3 Misters Provide Better Cooling
This portable misting system has 6' of 3/4" tubing with 3 nozzles on the
end which emits a fine mist (1/2 gph per nozzle). The flexible tubing will stay
in any position you bend it allowing you to spray mist exactly where you want
it. Add mist cooling to your greenhouse by setting misting stands up in front
of your intake vents. Great for personal misting when outdoors on the patio, grilling
out, or sun bathing by the pool. Recommended for use with a fine
water filter. Connect up to 5 portable misting stands with one of our 5
Way Hose Shutoffs. Colors will vary.
Heating | Venting
| Misting | Lights | Controls
| Benches | Meters
Watering | Electrical
| Plastic | PVC | Books
| Containers | Other
380 Greenhouse Drive
Buffalo Junction, VA 24529
434-374-2706 Phone, 434-374-2055 Fax
888-888-9050 Toll Free
Copyright Aarons Creek Farms, Inc. All Rights Reserved.