Advanced Greenhouse Controls - Sentinel, CAP, & IGS Plug n Grow Timers, Temperature & Humidity Controllers


	Categories


	GREENHOUSE KITS
	•		Compare Kits
	•		Aspen
	•		Cross Country
	•		EasyGrow
	•		FlowerHouse
	•		Juliana
	•		Little Greenhouse
	•		Sunshine

	SUPPLIES
	•		Benches
	•		Books
	•		Climate Controls
	•		Containers (Plant)
	•		Deer Repellent
	•		Electrical Supplies
	•		Fans & Shutters
	•		Grow Lights
	•		Heaters
	•		Meters
	•		Misting Systems
	•		Plastic Coverings
	•		PVC Pipe & Fittings
	•		Season Extenders
	•		Ventilation
	•		Watering
	•		Other Supplies

	RESOURCE CENTER
	•		Greenhouse Guide
	•		Supplies Guide
	•		Grow Light Guide
	•		Cold Frame Guide
	•		Foundation Guide
	•		Heater Calculator
	•		Fan Calculator
	•		Area Calculator
	•		Ordering Policies
	•		Shipping Details
	•		Order Tracking
	•		About Us
	•		Contact Us

Thermostats | Speed Controls | Humidistats | Timers | Premier Climate Controls

Advanced Greenhouse Climate Controls


Page:		1	2	3	4

Titan Apollo 2 Repeat Cycle Timer

Instruction Manual
	This cycle timer is capable of accurately cycling equipment in increments from 10 seconds to 20 minutes of "ON" time and 1 minute to 12 hours of "OFF" time between cycles. Timer has a built-in photosensor that cuts the timer off when it gets dark. Photosensor may be switched on or off as desired. It is ideally suited for irrigation, misting, drip, and ventilation controls to name a few. Solenoid valve is needed to automate most misting, drip, and irrigation systems. Timer plugs into a standard 110/120 volt outlet and has an outlet on the front for the device it will control (15 amp max)
	Price: $79 qty:

Sentinel DRT-1 Repeat Cycle Timer with Photosensor

Instruction Manual
	The DRT-1 timer is designed to control devices that must be activated on a repeating cycle.Solenoid valve is needed to automate most misting, drip, and irrigation systems. It offers an extremely wide range of time delays, and can be set in hours, minutes and seconds. Its entirely digital design makes it extremely precise, and its intuitive user interface make it easy to set up and use. It has two receptacles on the unit that can control up to 15-amps of power, it’s protected against overloads by the use of a resettable circuit breaker, and it features a modifiable photoperiod, providing light at whatever duration is needed.(15 amp max) Minimum time setting: 1 second Maximum time setting: 23 Hours 59 Minutes 59 Seconds
	Price: $109 qty:

CAP Day / Night Adjustable Thermostat with Sensor


	Plug-N-Play, Day & Night Settings This thermostat has a selector switch for heating, cooling, or off and a selector switch which allows you to choose from a 3, 5 or 7 degree differential. It also has a built-in photosensor that allows you to set separate day and night temperature settings. Thermostat plugs into a standard 110/120 volt outlet and has an outlet on the front so you can simply plug in any line voltage device you want to control (15 amp max). Temperature sensor is 12'. Temperature range is 50° to 100° F
	Price: $85 qty:

IGS-020R Day / Night Thermostat with Remote Sensor

The IGS-020R controller is a precision heating or cooling thermostat with a remote sensor, electronic display, and built-in photosensor which allows you to set separate day and night temperature settings. Includes timer, plug-in output box with outlet, and 6' CAT-5 cord. Operates on 110/120 voltage up to 15 amps.

Adjustable day & night temperature range: 36°F to 104°F
Adjustable differential range: 2°F to 9°F
Remote 10' sensor allows readings away from controller
Display shows ambient temperature

Price: ~~$159~~ $109 qty:

Sentinel UTC-1 Day / Night Thermostat with Remote Sensor

Plug-N-Play, Day & Night Settings
The UTC-1 Universal Temperature Controller is accurate to within 1° F and it displays the actual temperature of the area on a large LED display. It has separate day and night temp settings and it even records the minimum and maximum temperature readings. Features a Heating or Cooling mode with adjustable differential and 16 ft. remote probe. Simple to use, 100% DIGITAL temperature controller. Photocell allows separate Day and night temperature settings. Thermostat plugs into a standard 110/120 volt outlet (15 amp max).

Photocell allows day / night temperature settings
Record & recall minimum and maximum temperatures
Can be setup for heating or cooling
(Setpoint range: 32°F to 122°F, +/- 1°F accuracy)
Adjustable 1°F to 9°F temperature differential (deadband)
Remote sensor can be placed 16' away from control

Price: $125 qty:

Sentinel EVC-2 Temperature & Humidity Control

The EVC-2 is a digital temperature and humidity controller; customized for your needs. Each function has a clearly identified "pushbutton" and a large LCD display that makes it simple to use. 16' remote probe allows temperature and humidity to be measured at plant level. Operates on 110/120 voltage up to 15 amps.

Photocell allows day / night temperature & humidity settings and also provides daytime CO2 operation
Record & recall minimum and maximum temperatures & humidity
Can be setup for heating or cooling or combined cooling + dehumidification
(Setpoint range: 32°F to 122°F, +/- 1°F accuracy)
Independent humidity control to power a separate device for adding or removing humidity.
(0 to 99% humidity range, +/- 3% accuracy)
Adjustable 1°F to 9°F temperature differential (deadband)

Price: $259 qty:


Page:		1	2	3	4