Greenhouse Controls - Repeat Cycle Timers, Humidistats, & Speed Controllers


	Categories


	GREENHOUSE KITS
	•		Compare Kits
	•		Aspen
	•		Cross Country
	•		EasyGrow
	•		FlowerHouse
	•		Juliana
	•		Little Greenhouse
	•		Sunshine

	SUPPLIES
	•		Benches
	•		Books
	•		Climate Controls
	•		Containers (Plant)
	•		Deer Repellent
	•		Electrical Supplies
	•		Fans & Shutters
	•		Grow Lights
	•		Heaters
	•		Meters
	•		Misting Systems
	•		Plastic Coverings
	•		PVC Pipe & Fittings
	•		Season Extenders
	•		Ventilation
	•		Watering
	•		Other Supplies

	RESOURCE CENTER
	•		Greenhouse Guide
	•		Supplies Guide
	•		Grow Light Guide
	•		Cold Frame Guide
	•		Foundation Guide
	•		Heater Calculator
	•		Fan Calculator
	•		Area Calculator
	•		Ordering Policies
	•		Shipping Details
	•		Order Tracking
	•		About Us
	•		Contact Us

Thermostats | Speed Controls | Humidistats | Timers | Premier Climate Controls

Greenhouse Controls


Page:		1	2	3	4

Titan Day/Night Fan Speed Control

Titan Day/Night Fan Speed controller provides the indoor gardener with perfect ventilation control. Easy to use. Just plug your fan into the controller, set the day and night temperature required for your greenhouse, and then let the control do the rest. Operates on 110/120 voltage up to 6 amps.
- Control will operate a variable speed fan only -

Automatically increases or decreases fan speed based on selected controller temperature
Allows different temperature settings for day and night
Temperature control range is 55°F to 95°F
Six (6) foot temperature probe is accurate to within 2°F

Price: $99 qty:

ACF Fan Speed Controls

Instruction Manual
	This variable control lets you adjust the fan speed for exhaust and circulation fans in your greenhouse from 20% to 100% of output capacity (Minimum output depends on fan). It also has the ability to turn a fan on and off. Controller comes in weather proof electrical enclosures with watertight cover. This controller is very helpful in the winter when less ventilation is necessary and too much cold air flow at once from outside can cause temperature shock to nearby plants. Only use with fans approved for variable speed operation (includes all 20" and smaller ACF variable speed exhaust and circulation fans). Operates on 110/120 voltage up to 5 amps. Wiring required.
	Price: $34.95 qty:


	Prewired Fan Speed Control This is the same as the ACF variable fan speed control above except it comes prewired with an 8' grounded power cord with outlet. Simply plug the speed control into a standard 110/120 volt outlet. Then plug any 110/120 volt appliance into the outlet on the plug of the speed control. Only use with fans that have plugs and are approved for variable speed operation like the ACF variable speed exhaust and circulation fans.
	Price: $39.95 qty:

Instruction Manual
	10 Amp Fan Speed Control This variable control lets you adjust the fan speed for fans in your greenhouse from 20% to 100% of output capacity (Minimum output depends on fan). It also has the ability to turn a fan on and off. Controller comes in a weather proof electrical enclosure suited for greenhouse environments. Great option for equipment requiring a controller that can handle higher amperages like the ACF 24" variable speed exhaust fan. Operates on 110/120 voltage up to 10 amps. Wiring required.
	Price: $54.95 qty:

	Weatherproof Wiring Connector
	These connectors create a liquid tight seal around wires when attached to ACF hard wired thermostats and fan speed controls. (Prewired controls do not need this connector)
	Price: $2.75	qty:

Prewired Humidistat


	This control is used to turn on a humidifying device like a solenoid valve which powers a misting system when the humidity level drops below the level you select (20% - 80% range). It then turns the device off after the humidity rises back to the percentage selected. No wiring is necessary. Simply plug the device you want to control into the outlet on the plug of the humidistat, and select the percentage of humidity you want to maintain. Comes with 8' power cord with outlet. Operates on 110/120 voltage up to 6.5 amps.
	Price: $74.95 qty:

Titan EOS1 Humidity Controller


	The EOS1 controller is both a humidistat and a dehumidistat. It can be changed from humidify to dehumidify and back with the flip of a switch. In Humidify mode, it can be used to turn on a device like a solenoid valve which powers a misting system when the humidity level drops below the level you select. In Dehumidify mode, the controller can turn on a circulation fan, exhaust fan, or dehumidifier when the humidity level rises above the selected level. No wiring is necessary. Simply plug the device you want to control into the outlet on the plug of the EOS1 controller, and select the percentage of humidity you want to maintain. Comes with 6' power cord. 10% - 90% humidity range. 4% differential. Operates on 110/120 voltage up to 15 amps.
	Price: $119 qty:

Sentinel EVC-2 Temperature & Humidity Control

The EVC-2 is a digital temperature and humidity controller; customized for your needs. Each function has a clearly identified "pushbutton" and a large LCD display that makes it simple to use. 16' remote probe allows temperature and humidity to be measured at plant level. Operates on 110/120 voltage up to 15 amps.

Photocell allows day / night temperature & humidity settings and also provides daytime CO2 operation
Record & recall minimum and maximum temperatures & humidity
Can be setup for heating or cooling or combined cooling + dehumidification
(Setpoint range: 32°F to 122°F, +/- 1°F accuracy)
Independent humidity control to power a separate device for adding or removing humidity.
(0 to 99% humidity range, +/- 3% accuracy)
Adjustable 1°F to 9°F temperature differential (deadband)

Price: $259 qty:

Titan Apollo 2 Repeat Cycle Timer

Instruction Manual
	This cycle timer is capable of accurately cycling equipment in increments from 10 seconds to 20 minutes of "ON" time and 1 minute to 12 hours of "OFF" time between cycles. Timer has a built-in photosensor that cuts the timer off when it gets dark. Photosensor may be switched on or off as desired. It is ideally suited for irrigation, misting, drip, and ventilation controls to name a few. Solenoid valve is needed to automate most misting, drip, and irrigation systems. Timer plugs into a standard 110/120 volt outlet and has an outlet on the front for the device it will control (15 amp max)
	Price: $79 qty:

Sentinel DRT-1 Repeat Cycle Timer with Photosensor

Instruction Manual
	The DRT-1 timer is designed to control devices that must be activated on a repeating cycle.Solenoid valve is needed to automate most misting, drip, and irrigation systems. It offers an extremely wide range of time delays, and can be set in hours, minutes and seconds. Its entirely digital design makes it extremely precise, and its intuitive user interface make it easy to set up and use. It has two receptacles on the unit that can control up to 15-amps of power, it’s protected against overloads by the use of a resettable circuit breaker, and it features a modifiable photoperiod, providing light at whatever duration is needed.(15 amp max) Minimum time setting: 1 second Maximum time setting: 23 Hours 59 Minutes 59 Seconds
	Price: $109 qty:

7 Day Programmable Digital Timer

Instruction Manual
	This digital timer operates off of an internal clock and can be programmed with up to 8 different on & off settings per day. Each setting can be set to occur daily or during specific days of the week. Each on or off period is programmed in 1 minute increments. Timer features a heavy duty grounded outlet on the front and plugs into a standard 110/120 volt outlet (15 amp max).
	Price: $24.95 qty:


Page:		1	2	3	4